Equipment brief introduction:

Freezing equipment focuses on repairing wellhead equipment without killing the well. It can be used in a wide variety of situations, and at times there is no other safe alternative.
 
 
Equipment Specifications

Housing	Entire unit installed within a standard 20’ [6.09 m] sea container.
Gel Injection system	Onboard gel injection system rated to 7500 psi [51 Mpa/517 Bar] injection pressure.
	Dual gel injector system provides redundancy.
Integral Intensifier	Integral intensifiers to allow lower hydraulic working pressures on injectors.
Auto filling system	Onboard automated injection lubricator gel filling system.
Injection manifold	10,000 psi [70 Mpa/680 Bar] gel injection manifold.
Injection hoses	10,000 psi [70 Mpa/680 Bar] x 50’ [15 M] injection hose.
Injection check valve	10,000 psi [70 Mpa/680 Bar] gel injection check valve.
Gel mixing system	Freeze gel mixing equipment wheel mounted to facilitate outside mixing.
Power system	Onboard diesel generator for driving hydraulic and electrical systems.
Thaw and cleaning system	Heated pressure washer for thawing and cleaning operations c/w hose and wand.
Water tank	260 gallon [1000 L] water tank for gel mixing and pressure washer operations.
Inside lighting	Inside fluorescent lighting.
Outside lighting	Outside quartz lighting.
Bench and storage	Work bench and storage compartments.
Gel storage	Wet and dry bentonite gel storage.
Heating system	Inside electrical heating system.