-
Coal Bed gasLocation:
Capstone microturbines have multiple advantages over traditional engines in critical power applications, including reliability and dual-fuel capability.
Product details
Microturbines are extremely reliable and low maintenance because their air-bearing technology requires no oil or other lubricants, which significantly reduces maintenance and the disposal of hazardous materials.
Location: The Australian Outback
Project: Talinga gas line
Fuel: Coal bed gas
Application:
1.Three natural-gas powered C1000s are installed at the Talinga gas field located in the outback of Australia. The units provide 3MW of power to drive the site and drilling equipment.
2. Many C30s at Talinga have dual-fuel capabilities -the ability to operate on natural gas or propane to ensure continuous operation. Normally, C30s run on wellhead gas. However during well construction, propane is used to power the microturbines. Once the well is commissioned and natural gas is available, the Capstone C30 is quickly adapted to natural-gas operation. At each wellhead site, the microturbines provide electricity for pumps that extract water from the ground as part of the coal-seam gas extraction process.
If you have any questions or requirements, please contact Mr. Lu 010-64820099, or sent an email to
Charles-lu@top-well.com
Basic information for model selection：
1、Installation site
2、Environmental climate
3、Operation model: stand alone, grid connect, dual mode
4、Fuel specifications: pressure, component, etc.
5、Loads requirements
6、Heat recovery
7、Communications and controls
8、Others requirements
Location: The Australian Outback
Project: Talinga gas line
Fuel: Coal bed gas
Application:
1.Three natural-gas powered C1000s are installed at the Talinga gas field located in the outback of Australia. The units provide 3MW of power to drive the site and drilling equipment.
2. Many C30s at Talinga have dual-fuel capabilities -the ability to operate on natural gas or propane to ensure continuous operation. Normally, C30s run on wellhead gas. However during well construction, propane is used to power the microturbines. Once the well is commissioned and natural gas is available, the Capstone C30 is quickly adapted to natural-gas operation. At each wellhead site, the microturbines provide electricity for pumps that extract water from the ground as part of the coal-seam gas extraction process.
If you have any questions or requirements, please contact Mr. Lu 010-64820099, or sent an email to
Charles-lu@top-well.com
Basic information for model selection：
1、Installation site
2、Environmental climate
3、Operation model: stand alone, grid connect, dual mode
4、Fuel specifications: pressure, component, etc.
5、Loads requirements
6、Heat recovery
7、Communications and controls
8、Others requirements
